#Sony avr control auth tv#
To do this, access the AVR's menu and select: Video -> HDMI Setup -> TV Audio Switching -> Off. You can also disable the AVR from automatically switching to the "TV Audio" source when a CEC command is detected.
This will create a new link in the PLUG-INS > SonyAVR menu, allowing you to configure and control a new AVR: Note: for the control functions to be populated in the config page for the new. (GUI: Video -> HDMI Setup -> HDMI Control) This plugin is designed to interface Homeseer with Sony Audio/Video Receiver (AVR) using the 'Sony CIS-IP2' protocol. If you do not want these actions to occur please disable the HDMI Control option in the AVR's menu. If you experience AVR sources switching on their own or your AVR powering on or off when your TV is powered on or off, then it's a good bet that CEC is enabled in your AVR and TV. CEC can control power on/off functions, volume control and source switching by sending a command over the connected HDMI cables.įor CEC to work, all HDMI connected devices must have and support the CEC feature.
This feature may also be available on other CEC supported devices such as TVs or projectors. Connect your Sources to the AVR via HDMI or HDMI + Digital Audio - HDMI on its own for Sources which allow you to send Video + 5.1 via HDMI whilst some Sources (SKY+ HD) may require you to use HDMI. CEC (Consumer Electronics Control) also called HDMI Control, is a feature on most AVRs that allows for one button control of supported system functions. Retain the SCART cable between the TV and the AVR to get analogue stereo audio Out of the TV into the AVR.
0 kommentar(er)
